Features

Cost-competitive 18V cordless impact drill powered by Li-ion battery
The single sleeve keyless drill chuck allows for easy bit installation/removal
This model is compact and lightweight for easy handling
Conveniently located push button for forward and reverse
High comfort grips for reduced fatigue upon use
Two-speed gearbox
Metal gears for long service life and durability

HAMMER DRIVER DRILL 18V BL1815

Features The Highest Torque In The Industry!

eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
Battery fuel gauge indicates approximate remaining battery power
Brushless DC motor with high power to weight and size ratio
Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications
Battery protection system provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life and overall battery life
21 clutch settings deliver up to 1,090 in. lbs. of torque
All metal gears for more efficient power transmission
Ultra-compact design (only 8-1/8" long)
Dual LED job lights with afterglow feature
Improved ergonomic soft rubber grip design for vibration absorption and comfortable operation features re-contoured rear grip portion and ribbed grip for improved hold

This 18v LXT SDS-PLUS Rotary Hammer is capable of drilling through steel, wood and masonry with ease. With the power of Lithium-Ion you can be sure to get the job done, wherever you are!

Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery.
Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
Conveniently located push button for forward and reverse.
High comfort grips.
One-touch sliding chuck for easy bit changes.
Rotation mode: The chisel can rotate a full 360 degrees with 40 different locking positions.
Triple operation mode: Rotary only, hammer only and rotary hammer.

Makita's FIRST 18VX2 Direct (36V) 1" Rotary Hammer
Hammer & Rotation / Hammer Only / Rotation Only Features Quick Change Drill Chuck
SDS-PLUS Shank
Variable Speed, Reversible
Accepts 2 x 18V Li-Ion batteries without a battery converter for use with existing 18V Li-Ion battery platform
Center of gravity located close to rear handle resulting in ideal tool balance during operation
Torque limiter stops rotation if bit jams for increased operator safety and enhanced motor protection
40 angle bit positions enable chisels to be positioned at optimum angle of operation
Rubber housing bumper protects mode selector switch and gear housing from damage
LED job light with afterglow feature
One touch sliding chuck enables quick and easy bit changes
Sliding rear handle for increased vibration absorption
Ergonomic soft rubber grip design for vibration absorption and comfortable operation

Motor delivers 1,900 SPM for faster and smooth cutting
Ideal for cutting sheet metal at thicknesses up to 16 gauge
Die holder rotates 360? to meet demands of cutting direction
Cutting radius: inner edge 45mm; outer edge 50mm
Anti-restart function for safety (with warning lamp).

Makita DJR185Z 18v Mini Reciprocating Saw Bare Unit is a versatile and powerful tool that's perfect for cutting through a variety of materials. Compact design and light weight construction, it's easy to manoeuvre and use in tight spaces.

Compact and lightweight design for easy maneuverability
Tool-less blade change system for quick and easy blade changes
Variable speed control dial for precise cutting in a variety of materials
Electric brake for maximum productivity
Battery & Charger Sold Separately

Experience a new class in cordless with 18V LXT Sub-Compact Brushless tool. Sub-Compact tools are the most compact and lightest weight in the 18V category, so users get 12V Max handling with the compatibility of the world's largest 18V system. The 18V Brushless Sub Compact Recipro Saw (DJR188Z) delivers high performance in a subcompact format making it perfect for tasks like cutting between studs or in pits.

20mm stroke with a cutting capacity of 255mm in wood
Compact and lightweight for increased maneuverability
High performance 3,000spm no load speed
XPT technology that protects against dust & moisture
One touch tool-less blade clamp

Details INCLUDES: • (1) Drill • (1) Drill Chuck (193229-6) • (1) Chuck Key (763420-6) • (1) Side Handle (152492-0) FEATURES: • Variable speed (0 – 600 RPM) for mixing and drilling in a wide variety of materials • Forward and reverse lever for operator convenience • Well-balanced design at only 6.2 lbs. for reduced operator fatigue • D-handle rotates 360° with 24 detent stops for multi-position operation • Rubberized grip for increased operator comfort • All-ball bearing construction for durability and longer tool life • Heavy duty industrial 1/2" drill chuck engineered for positive bit retention • On-board chuck key storage for fast and convenient bit changes • Powerful 8.5 AMP motor engineered for improved mixing and drilling performance • Double insulated • Ideal for mixing drywall mud, plaster, drilling large holes and more SPECIFICATIONS: • AMPS : 8.5 • Capacity (steel) : 1/2" • Capacity (wood) : 1-1/2" • No Load Speed (variable speed) : 0 - 600 RPM • Overall Length : 13-3/8"

MAKITA CORDLESS IMPACT DRIVER

The Makita DTD157Z is a cordless impact driver powered by 18V LXT Li-Ion battery.
Electric brake
Variable speed control by trigger
Forward / reverse rotation
LED job light
Ergonomically designed high comfort grip.
Anti bit-wobbling structure
Assist mode for controlled screwdriving
Brushless Motor
Electronic 2-speed impact power selection
Aluminium hammer case
Belt clip

Voltage: 18 v
Standard Bolt: M5-M14
High Tensile Bolt: M5-M12
Coarse thread (length): 22 - 90 mm
Max Fastening Torque: 140 Nm
Battery Type: Lithium-ion
Vibration: Fastening Bolt: 11.5 m/sec2
Vibration K factor: 1.5 m/sec2
Noise sound pressure: 95 dB(A)
Noise sound power: 106 dB(A)
Noise K factor: 3 dB(A)
Body only machine
Net weight: 1.2 - 1.5 kg
Battery Quantity (5.0ah): 2
Driving Shank: 6.35mm 1/4 " Hex
Blows per Minute (Hi) - ipm: 0 - 4,100 ipm
Blows per Minute (Lo) - ipm: 0 - 2,000 ipm
Machine Screw: M4 - M8
No Load Speed (Hi): 0 - 3,000 rpm
No Load Speed (Lo): 0 - 1,300 rpm

Specifications
o Battery Type: Lithium-ion
o Voltage: 18 v
o Impacts: 0 - 3200 ipm
o Drive Square: 1/2 "
o Noise sound pressure: 90 dB(A)
o Noise sound power: 101 dB(A)
o Noise K factor: 3 dB(A)
o No Load Speed: 0 - 2100 rpm
o Max Torque: 230 Nm
o Vibration: Fastening Bolt: 9 m/sec2
o Vibration K factor: 1.5 m/sec2
o Net weight: 1.7 kg

Features & Benefits
o 1/2" drive
o 4 pole motor
o Conveniently located push button for forward and reverse
o High comfort grips
o LED job light with afterglow

IMPACT WRENCH 1/2" 18V BL 330NM

ANGLE GRINDER 4-1/2

Makita's 5-Inch SJS Angle Grinder (model GA5020) combines 10.5 amp power with comfort and motor-protection features for longer-lasting industrial performance. The GA5020 is engineered with Makita's innovative Super Joint System (SJS) to protect the gears for longer tool life. View larger GA5020 Features POWER - 10.5 amp motor delivers 11,000 rpm PERFORMANCE - Super Joint System (SJS) helps prevent gear damage DURABILITY - Labyrinth construction, zig-zag varnish, and thicker coil wires for longer tool life DESIGN - Electric br

Super Joint System (SJS) technology helps prevent gear damage caused by accidental wheel binding
Powerful 10.5 AMP motor delivers more output for increased performance
Electric brake for maximum productivity
Rotatable gear housing can be positioned every 900
Refined design at only 5.9 lbs. for reduced operator fatigue
AC/DC switch for use with alternative power source
Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life
Externally accessible brushes for greater serviceability